Biolight ST

Biolight ST

Biolight ST

Basic taper radiopaque fiber posts.

Compatible with every adhesive system
Easily adaptable to the simplest shapes
Bis-GMA-free

Dental pratice

Root anchoring

Biolight Plus
Biolight Dual
Biolight ST

Impressing

Splints and bridges

Fast Splint Matrix

Temporary reinforcement

Personal protection equipment

Adhesives and composites

Biolight Bond DC
Biolight Core DC

Laboratory

Mobile reinforcement

ALL-ON-4 reinforcement

Splints and bridges

Fast Splint Matrix

Temporary reinforcement

Personal protection equipment

Clinical Case
Protocol
Technical Data
References
Documents/Bibliography

Case of Dr. Cyril Vidal - Poitiers - July 2020

Figure 1: Cavity sanitizing after the endodontics filling

Figure 2: Placement of the self-etching adhesive in the cavity

Figure 3: Placement of the self-etching adhesive in the distal chamber

Figure 4: Drying without drying out

Figure 5: Light curing of the self-etching adhesive

Figure 6: Injection of the dual composite using a precision syringe

Figure 7: Placement of the Biolight ST post, diameter of 1.2 mm

Figure 8: Placement of the self-etching adhesive in the rest of the cavity

Figure 9: Final coronal-radicular reconstitution

Figure 10: Preoperative radiography

Figure 11 : Postoperative radiography

Unwrap and shape the channel with a Gates drill (in the desired post diameter). Pass the Biolight Dual/ST reamer of the desired size.

Fill the canal in retrograde with a Dual setting composite. Unwrap and shape the channel with a Gates drill (in the desired post diameter).

Insert the pin into the channel perfectly suited to its size. Unwrap and shape the channel with a Gates drill (in the desired post diameter).

Maintain pressure and light-cure. Unwrap and shape the channel with a Gates drill (in the desired post diameter).

Construct the coronal stump with a reconstructive composite, according to the rules of the trade.

Shape the coronary stump. Construct the coronal stump with a reconstructive composite, according to the rules of the trade.

Flexural stress at 30° :

Higher than 550 Mpa

3 points flexural stress :

Higher than 1 100 Mpa

Interlaminar shear stress

Higher than 50 Mpa

Radiopacity (ISO 4049):

Higher than 200% Al

For more information

Biolight ST Introduction Box

References : 03102

Biolight ST personalized offer

4 boxes of 10 posts, at your discretion + 4 reamers, at your discretion

References : 03123

Box of 10 posts

size 1.0 Red

References : 03096

Box of 10 posts

size 1.2 Blue

References : 03097

Box of 10 posts

size 1.35 Green

References : 03098

Box of 10 posts

size 1.5 Black

References : 03099

Box of 10 posts

size 1.7 White

References : 03100

Box of 10 posts

size 2.0 Yellow

References : 03101

1 Reamer Red

size 1.0

References : 06026

1 Reamer Blue

size 1.2

References : 06027

1 Reamer Green

size 1.35

References : 06028

1 Reamer Black

taille 1.5

References : 06029

1 Reamer blanc

size 1.7

References : 06030

1 Reamer Yellow

size 2.0

References : 06031

Installation protocol

Bis-GMA article

Safety data sheet

Biolight ST notice

Got questions? Need any precision? Contact us: +33 4 76 07 79 57

Got questions? Need any precision? Contact us: +33 4 76 07 79 57

Medical device for dental care reserved for health professionals, not reimbursed by social security. Read carefully the instructions in the leaflet or on the label before use. FiberForce, FiberForce CST, Fast Splint Matrix, Biolight: Class IIA (CE mark issued by SGS) CE1639. CST Link: Class I (CE marking)